Home Kit

GuardianPro@Home enables you to take your own impression in the comfort of your home.
Once you have chosen you design online you will receive a home kit. 

Instruction
Warning- Our home kits are unsuitable for anyone with loose teeth, crowns or fixed braces.
The kit is simple to use and children should be supervised at all times when using the kit. 

Step 1.
Read through the instructions fully before attempting to use the kit. Also click on the short video which will demonstrate how to take a good impression.

Step 2.

From the trays provided choose the tray which best fits the mouth.
Both putty's need to be mixed together to a uniformed colour, allow no more then 10 seconds for mixing.
Roll into a sausage shape and lay around the tray (Fig 1.)

Step 3

Immediately place the tray in the mouth and using your thumbs either side place equal pressure and push up, do not bite down, keep pushing the tray up as far as you can until the material spreads around the gums.
Keeping your thumbs under the tray massage the excess putty under the top lip to take the contours of your gums.
​If possible close you lips around the tray but continue to support the tray in your mouth.

Step 4

The tray must remain in the mouth for at least 2/3 minutes or until the material has gone hard. To remove the tray place your index fingers either side at the back of the tray, using each finger in turn gentle pull the tray to release the vacuum.

Step 5

Rinse and once dry place the impression in the clear bag and seal. Please place the order form and the remains of the kit in the envelope provided. Once posted please allow 10 working days for the manufacturing of your GuardianPro Mouthguard.

Whitening Trays & Orthodontic Retainers

You will be provided an additional tray. Please use the cut out tray on your lower teeth and follow the same simple steps as above.